F 150 2WD Pickup V8-5.4L SOHC VIN 5 (2004)
17.
Remove and discard the six (6) pickup box bolt attachment clips from the vehicle frame.
Right Outer Panel Removal
1.
Using suitable pliers, bend the inner flange upwards along the bed upper rail to allow access for a spot weld cutting tool. See Figure 8.
2.
Using a commercially available spot weld cutter such as a Spottel(R) or a Blair(R), drill out the spot welds that are accessible. Be sure to only drill
through the spot weld in the outer panel sheet metal. See Figure 9.
3.
CAUTION: DO NOT remove the foam sealer from around the inside of the wheel opening.
