F 150 2WD Pickup V8-5.4L SOHC VIN 5 (2004)
6.
Connect the rear axle vent tube to the bed crossmember.
7.
Install and connect the fuel filler tube-to-pickup bed clamp.
Tighten the clamp to 7 Nm (62 lb-in).
8.
If equipped connect the trailer harness connector(s) at the rear bumper.
9.
Connect the license plate lamp connectors.
10.
Connect the main tail lamp and reverse park aid connectors as applicable.
11.
Reinstall the ground bolt and tighten to 10 Nm (89 lb-in).
12.
Reinstall the wheel opening molding, if equipped.
13.
Reinstall the tail lamp assembly plastic mounting anchors, then connect and install the tail lamp assembly.
14.
Reinstall the tailgate.
15.
Reinstall the RH upper rail plastic cover.
