F 150 2WD Pickup V8-5.4L SOHC VIN 5 (2004)
Using the special tool, remove the three roller followers from the previous step.
8. Notice: The crankshaft cannot be moved past the 6 o'clock position once set.
Rotate the crankshaft clockwise, as viewed from the front, positioning the crankshaft damper spoke at the 6 o'clock position and the timing mark
indentation at the 7 o'clock position.
9. Notice: Engine is not freewheeling. Camshaft procedure must be followed exactly or damage to valves and pistons will result.
Notice: The Timing Chain Wedge tool must be installed square to the timing chain and the engine block.
NOTE: Front cover removed for clarity.