F 150 2WD Pickup V8-5.4L SOHC VIN 5 (2004)
4. Visually inspect the camshaft phaser and sprocket for squareness (A). lfthe trigger wheel or spring is deformed or damaged (B), install a new
camshaft phaser and sprocket.
Item 10: Camshaft Phase and Sprocket Installation Note
1. NOTICE: Damage to the camshaft phaser and sprocket assembly will occur if mishandled or used as a lifting or leveraging device.
If installing a new camshaft phaser and sprocket, transfer the original scribe mark to the new camshaft phaser and sprocket.
2. NOTICE: The timing chain must be installed in its original position onto the camshaft phaser and sprocket using the scribed marks, or damage to
valves and pistons will result.
NOTICE: Damage to the camshaft phaser and sprocket assembly will occur if mishandled or used as a lifting or leveraging device.
Align the scribe marks and position the camshaft phaser and sprocket into the timing chain.
Items 5-9: LH Camshaft Bearing Cap Bolts, Bearing Caps, and Camshaft Installation Note
1. Lubricate the camshaft journals with clean engine oil.
2. Notice: Do not remove the timing chain wedge tool at any time during assembly. If the special tool is removed or out of placement, the engine
front cover must be removed and the engine must be retimed.
Notice: Damage to the camshaft phaser and sprocket assembly will occur if mishandled or used as a lifting or leveraging device.
Notice: Do not allow the camshaft roller followers to move out of position when removing the camshaft.
