F 150 2WD Pickup V8-5.4L SOHC VIN 5 (2004)
Engine Block Heater: Service and Repair
Block Heater
Material
Material
Removal and Installation
1. Drain the engine cooling system.
2. With the vehicle in neutral, position it on a hoist.
3. Remove the parts in the order indicated in the illustrations and tables.
4. To install, reverse the removal procedure.
5. Fill and bleed the cooling system.
Item 2: Block Heater Retaining Screw Removal Note
1. CAUTION: Do not loosen the block heater retaining screw more than necessary for removal.