F 150 2WD Pickup V8-5.4L SOHC VIN 5 (2004)
6. Remove only the three roller followers shown in the illustration.
7. Notice: Do not allow the valve keepers to fall off the valve or the valve may drop into the cylinder.
NOTE: The camshaft roller followers must be installed in their original locations. Record camshaft roller follower locations.
NOTE: It may be necessary to push the valve down while compressing the spring.
Using the special tool, remove only the three designated camshaft roller followers from the previous step.
8. Notice: The crankshaft cannot be moved past the 6 o'clock position once set.
Rotate the crankshaft clockwise, as viewed from the front, positioning the crankshaft damper spoke at the 6 o'clock position and the timing mark
indentation at the 7 o'clock position.