F 150 2WD Pickup V8-5.4L SOHC VIN 5 (2004)
Remove the upper front axle carrier mounting bushing bolt.
6. Remove the axle shaft housing carrier bushing bolt.
7. Remove the lower front axle carrier mounting bushing bolt.
8. Lower the front axle assembly.
Item 6: Oil Pan Removal Note
1. CAUTION: Do not use metal scrapers, wire brushes, power abrasive discs, or other abrasive means to clean the sealing surfaces. These may
cause scratches and gouges resulting in leak paths. Use a plastic scraper to clean the sealing surfaces.
Remove and discard the oil pan gasket. Clean the sealing surfaces with silicone gasket remover and metal surface prep. Follow the directions on
the packaging. Inspect the mating surfaces.
Items 8-12: Oil Pump, Oil Pump Screen and Pickup Tube and Bolts Removal Note
1. Remove the timing drive components.
