F 150 2WD Pickup V8-5.4L SOHC VIN 5 (2004)
Intake Manifold: Service and Repair
Intake Manifold
Special tools and equipment
Special Tool(s)
material
Material
WARNING: Do not smoke or carry lighted tobacco or open flame of any type when working on or near any fuel-related components. Highly
flammable mixtures are always present and can be ignited. Failure to follow these instructions may result in personal injury.
WARNING: Fuel in the fuel system remains under high pressure even when the engine is not running. Before working on or disconnecting
any of the fuel lines or fuel system components, the fuel system pressure must be relieved. Failure to follow these instructions may result in
personal injury.
CAUTION: If the supply manifold is used as a leverage device, damage may occur to the supply manifold. Care must be taken when working around
the supply manifold.
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Relieve the fuel system pressure.
3. Drain the engine cooling system.
4. Remove the air cleaner and the air cleaner inlet pipe and resonator.
5. Remove the generator.
