F 150 2WD Pickup V8-5.4L SOHC VIN 5 (2004)
6. Remove the parts in the order indicated in the illustrations and tables.
7. To install, reverse the removal procedure.
Items 5 and 13: Positive Crankcase Ventilation (PCV) Tube and Vapor Management Valve (VMV) Tube Quick-Release Fitting Removal Note
1. CAUTION: When reusing liquid or vapor tube connectors, make sure to use compressed air to remove any foreign material from the connector
retaining clip area before separating from the tube.
Disconnect the quick-release fitting.
^
Push the connector toward the tube to release pressure.
^
Push the release tab clockwise.
^
Disconnect the quick-release fitting.
Item 6: Fuel Supply Tube Spring Lock Coupling Removal Note
WARNING: Fuel in the fuel system remains under high pressure even when the engine is not running. Before servicing or disconnecting any
of the fuel lines or fuel system components, the fuel system pressure must be relieved to prevent accidental spraying of fuel, causing personal
injury or a fire hazard.
CAUTION: Fuel injection equipment is manufactured to very precise tolerances and fine clearances. It is therefore essential that absolute cleanliness
is observed when working with these components. Always install blanking plugs to any open orifices or tubes.
CAUTION: When reusing liquid or vapor tube connectors, make sure to use compressed air to remove any foreign material from the connector
retaining clip area before separating from the tube.
1. Remove the safety clip from the spring lock couplings.