F 150 2WD Pickup V8-5.4L SOHC VIN 5 (2004)
To remove individual parts, only carry out the listed steps:
4. To install, reverse the removal procedure.
Items 1-3: Valve Spring Retainer Keys, Valve Spring Retainers, and Valve Springs Removal Note
1. Position the camshaft so that the cylinder being serviced has the intake and exhaust cam lobes away from the roller follower. Lobe must be
horizontally 90 degrees higher.
2. Notice: Do not allow the valve keepers to fall off the valve or the valve may drop into the cylinder.
NOTE: It may be necessary to push the valve down while compressing the spring.
