F 150 2WD Pickup V8-5.4L SOHC VIN 5 (2004)
Install the special tool in the LH timing chain as shown.
10. Notice: Do not remove the Timing Chain Wedge tool at any time during assembly. If the special tool is removed or out of placement, the engine
front cover must be removed and the engine must be retimed.
Notice: The timing chain must be installed in its original position onto the camshaft phaser and sprocket using the scribed marks, or damage to the
valves and pistons will result.
Note: RH shown, LH similar.
Scribe a location mark on the timing chain and the camshaft phaser sprocket assembly.
11. Notice: Remove the front thrust camshaft bearing cap straight upward from the bearing towers, or the bearing cap may be damaged from
sideloading.
NOTE: The camshaft bearing caps must be installed in their original locations. Record camshaft bearing cap locations.
