F 150 2WD Pickup V8-5.4L SOHC VIN 5 (2004)
Blower Motor Resistor: Description and Operation
BLOWER MOTOR RESISTOR
The blower motor resistor:
-
is located on the heater core and evaporator core housing near the blower motor.
-
has three resistor elements mounted on the resistor board to provide four blower motor speeds.
-
depending on the blower motor switch position, series resistance is added or bypassed in the blower motor circuit to decrease or increase blower
motor speed.
-
has an overheating device (thermal limiter) that will open the resistor coil when the temperature reaches approximately 220°C (428°F),
interrupting the blower motor operation in all speeds except high.
-
is serviced as an assembly. The thermal limiter cannot be reset and is not serviceable.