F 150 2WD Pickup V8-5.4L SOHC VIN 5 (2004)
Disconnect the quick release fitting.
^
Push the fitting toward the tube to release pressure.
^
Push the release tab clockwise.
^
Disconnect the quick release fitting.
Item 2: Heated PCV Intake Fitting Tube Quick Release Fitting Installation Note
1. CAUTION: Make sure the quick release fitting clicks into place when installing the tube. To make sure that the quick release fitting is fully
seated, pull on the tube.
NOTE: Apply clean engine oil to the end of the tube before connecting the fitting.
Connect the quick release fitting.