F 150 2WD Pickup V8-5.4L SOHC VIN 5 (2004)
5. Remove the special tool.
INSTALLATION
1. To install, reverse the removal procedure.
Items 9-7: Fuel Injector-to-Supply Manifold O-Ring, Fuel Injector and Fuel Injector-to-Intake Manifold O-Ring Installation Note
1. CAUTION: When installing the fuel injectors, make sure that the injectors are fully engaged in the fuel injector cups.
NOTE: Lubricate the new fuel injectors with clean engine oil.
Install new O-rings on the fuel injectors and install the fuel injectors.
Item 4: Fuel Tube Spring Lock Coupling Installation Note
1. Inspect and clean both coupling ends. Install new O-rings and garter springs if necessary.
Lubricate the O-rings with engine oil.
2. Fit the male fitting into the female end and push until the garter spring snaps over the flared end of the female fitting.