F 150 2WD Pickup V8-5.4L SOHC VIN 5 (2004)
Fuel Filler Hose: Service and Repair
FUEL TANK AND FILLER PIPE
Special Tool(s)
SPECIAL TOOL(S)
REMOVAL
WARNING:
-
The evaporative emissions system contains fuel vapor and condensed fuel vapor. Although not present in large quantities, it still presents
the danger of explosion or fire. Disconnect the battery ground cable from the battery to minimize the possibility of an electrical spark
occurring, possibly causing a fire or explosion if fuel vapor or liquid fuel are present in the area. Failure to follow these instructions can
result in personal injury.
-
Do not smoke or carry lighted tobacco or open flame of any type when working on or near any fuel related component. Highly flammable
mixtures are always present and can be ignited. Failure to follow these instructions can result in personal injury.
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Disconnect the battery ground cable.
3. Relieve the fuel system pressure.
4. NOTE: The following steps are only necessary if servicing the fuel tank or fuel pump module.
Remove the filler pipe hose connection. Loosen the clamp and disconnect the hose.
5. NOTE: Follow the operating instructions supplied by the equipment manufacturer.