F 150 2WD Pickup V8-5.4L SOHC VIN 5 (2004)
Crankshaft Position Sensor: Service and Repair
CRANKSHAFT POSITION (CKP) SENSOR
REMOVAL
1. With the vehicle in neutral, position it on a hoist.
2. Disconnect the battery ground cable.
3. Remove the accessory drive belt.
4. Remove the parts in the order indicated in the illustrations and tables.
Item 1: Air Conditioning Compressor Bolt Removal Note
1. Loosen the air conditioning compressor bolts enough to slide the compressor down 25 mm (1 in), to allow access to the CKP sensor.
INSTALLATION
1. To install, reverse the removal procedure.
