ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

All Technical Service Bulletins for Keyless Entry Module: > < Keyless Entry - Keypad Inoperative
Page 2
background image

8.

Enter the VSM Data from As Built, starting with C1-01, press "STORE".

9.

Select "YES" when asked "DOES THE AS BUILT DATA LIST C1-02?".

10.

Enter 6010 0000 0033 for Regular and Super Cab, or enter 2010 0000 00F3 for SuperCrew into C1-02 data, press "STORE".

11.

Enter the VSM Data from As Built, into C1-03, press "STORE".

12.

Select "NO" when asked "DOES THE AS BUILT DATA LIST C1-04?".

13.

Select "RESTORE MODULE CONFIG-NEW ECU". At this point NGS should indicate whether programming was successful. If unsuccessful,
verify good connection at DLC, good power and ground to VSM, self-test VSM, and clear codes, cycle the key and reattempt the procedure.

WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage

OPERATION

DESCRIPTION

TIME

050505A

2004-2005 F150

0.3 Hr.

Reprogram Vehicle
Security Module (Do Not
Use With 12650D,
12650D84, 12651D,
12651D4)

DEALER CODING

CONDITION

BASIC PART NO.

CODE

7021546

12

Disclaimer

All Technical Service Bulletins for Keyless Entry Module: > < Keyless Entry - Keypad Inoperative