ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Air Bag Deactivation Indicator|Diagrams|Page 8516 > < Air Bag Deactivation Indicator|Diagrams
Page 1
background image

Air Bag Deactivation Indicator: Service Precautions

WARNING:

-

Always wear safety glasses when repairing an air bag supplemental restraint system (SRS) vehicle and when handling an air bag module.
This will reduce the risk of injury in the event of an accidental deployment.

-

To reduce the risk of serious personal injury, read and follow all warnings, cautions, notes, and instructions in the supplemental restraint
system (SRS) deactivation/reactivation procedure.  Refer to Air Bag(s) Arming and Disarming.

-

The restraint system diagnostic tool is for restraint system service only. Remove from the vehicle prior to road use. Failure to remove
could result in injury and possible violation of vehicle safety standards.

-

To avoid accidental deployment and possible personal injury, the backup power supply must be depleted before repairing or replacing
any front or side air bag supplemental restraint system (SRS) components and before servicing, replacing, adjusting or striking
components near the front or side air bag sensors, such as doors, instrument panel, console, door latches, strikers, seats and hood latches.

The front impact severity sensor is located on the hood latch support bracket.

To deplete the backup power supply energy, disconnect the battery ground cable and wait at least one minute. Be sure to disconnect
auxiliary batteries and power supplies (if equipped).

Air Bag Deactivation Indicator|Diagrams|Page 8516 > < Air Bag Deactivation Indicator|Diagrams