F 150 2WD Pickup V8-5.4L SOHC VIN 5 (2004)
7. Remove the two steering wheel back cover plugs (one shown).
8. Remove the two driver air bag module bolts (one shown).
9. Remove the driver air bag module.
1. Release the two retaining tabs. Disconnect the driver air bag module electrical connector.
-
Label the driver air bag module squib number on the driver air bag module electrical connector before disconnecting.
2. Release the two retaining tabs. Disconnect the driver air bag module electrical connector.
-
Label the driver air bag module squib number on the driver air bag module electrical connector before disconnecting.
3. Disconnect the two electrical connectors (one shown).
4. Remove the driver air bag module.
10. Attach the restraint system diagnostic tools to the clockspring electrical connectors at the top of the steering column.
