ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Air Bag Deactivation Switch|Locations|Page 8833 > < Air Bag Deactivation Switch|Locations|Page 8831
Page 2
background image

3. Remove the parts in the order indicated in the illustration and table.

INSTALLATION

1. NOTE:  Make sure the battery negative cable is still disconnected before continuing with the installation portion of this procedure.

To install, reverse the removal procedure.

2. Connect the battery ground cable.
3. With the restraint system diagnostic tools installed at all deployable devices, prove out the supplemental restraint system (SRS).  See: Air Bag

Systems/Air Bag(s) Arming and Disarming/Service and Repair/Prove Out Procedure

4. Disconnect the battery ground cable and wait at least one minute.

5. WARNING:  To reduce the risk of serious personal injury, read and follow all warnings, cautions, notes, and instructions in the

supplemental restraint system (SRS) deactivation/reactivation procedure.  Refer to Air Bag(s) Arming and Disarming.

Reactivate the supplemental restraint system (SRS).  Refer to Air Bag(s) Arming and Disarming.

6. Connect the battery ground cable.

7. WARNING:  The restraint system diagnostic tool is for restraint system service only. Remove from the vehicle prior to road use. Failure

to remove could result in injury and possible violation of vehicle safety standards.

With all the restraint system diagnostic tools removed, prove out the supplemental restraint system (SRS).  See: Air Bag Systems/Air Bag(s)
Arming and Disarming/Service and Repair/Prove Out Procedure

Air Bag Deactivation Switch|Locations|Page 8833 > < Air Bag Deactivation Switch|Locations|Page 8831