F 150 2WD Pickup V8-5.4L SOHC VIN 5 (2004)
12. NOTE: When installing a new occupant classification sensor, a prepaid return postcard is provided with the new occupant classification sensor.
The serial number for the new part and the vehicle identification number (VIN) must be recorded and sent to Ford Motor Company.
Fill out the necessary information on the occupant classification sensor traceability card and return it along with the complete inoperative occupant
classification sensor to Ford Motor Company.
-
When returning the inoperative occupant classification sensor, include the following: seat cushion foam pad, bladder, electronic control unit,
pressure sensor (transducer), hose, electrical connectors and wire harness (service part occupant classification sensor only).
Item 1: Occupant Classification Sensor (OCS) Service Kit Installation Note
1. Bend the tab back on the pressure sensor component bracket.
2. If not done already, slide the wire support keeper back to allow for clearance.
3. CAUTION:
-
Inspect the occupant classification sensor assembly, seat cushion pan and support assembly for any foreign objects before installing
