F 150 2WD Pickup V8-5.4L SOHC VIN 5 (2004)
Alignment: Service and Repair
Front Toe Adjustment
Front Toe Adjustment
1. Start the engine and center the steering wheel.
2. Turn the engine off, and hold the steering wheel in the straight-ahead position using a suitable holding device.
3. NOTE: Do not allow the steering gear bellows to twist when the front wheel spindle tie-rod is rotated.
Remove the clamps.
4. Loosen the nuts.
^
Clean and lubricate the nut(s) and front wheel spindle tie-rod threads.
5. Rotate the front wheel spindle tie-rods.
6. Start the engine and recenter the steering wheel.
^
Recheck the toe settings and adjust if necessary.
