F 150 2WD Pickup V8-5.4L SOHC VIN 5 (2004)
10. Remove the upper ball joint castellated nut.
1. Remove and discard the cotter pin.
2. Remove and discard the castellated nut.
Caution: Do not damage the ball joint boot when installing the special tool.
11. Using the special tool, separate the front knuckle from the front suspension upper arm.
12. Remove the hand-tighten lower ball joint castellated nut, then remove the front wheel knuckle.
13. Remove the snap ring from the ball joint. Discard the snap ring.
