F 150 2WD Pickup V8-5.4L SOHC VIN 5 (2004)
1. Disconnect the electrical connector.
1
Disconnect the overdrive cancel button electrical connector.
2
Cut the tie strap holding the wire harness to the base of the shifter.
2. Remove the brake shift interlock actuator.
1
Remove the bulb from the housing
2
Cut the tie strap from the wire harness.
3
Remove the two screws and remove the brake shift interlock actuator.
Item 9: Brake Shift Interlock Actuator Installation Note
1. Install the brake shift interlock actuator.
1
Install the brake shift interlock actuator and install the two screws.
2
Install the bulb into the housing
3
Install a new tie strap to the wire harness.