F 150 2WD Pickup V8-5.4L SOHC VIN 5 (2004)
Valve Body: Service and Repair
Main Control Valve Body
Special Tools And Equipment
Special Tool(s)
Removal and Installation
CAUTION: Do not pull on the molded lead frame. This may cause damage to the connector ends. Carefully pry up on the locking tabs to disconnect
the solenoids. Disconnect the molded lead frame from the solenoids.
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Loosen, but do not remove the transmission fluid pan bolts and allow the fluid to drain. Once the fluid has drained, remove the bolts.
3. Remove the transmission fluid pan and gasket.