F 150 2WD Pickup V8-5.4L SOHC VIN 5 (2004)
1. NOTE: Do not attempt to service the universal joint without a service kit available.
NOTE: The original universal joints are retained by staking. Service universal joints are retained by traditional snap rings installed in service only
grooves provided in the driveshaft yoke ears.
Not all the components of the universal joint kit will be used.
2. CAUTION: Do not, under any circumstance, clamp the driveshaft assembly in the jaws of a vise or similar holding fixture. Denting or localized
fracturing may result, causing driveshaft failure during vehicle operation.
Place the driveshaft on a suitable workbench. Do not damage the tube.
3. NOTE: If the components are not marked and therefore installed incorrectly, driveshaft imbalance can occur.