F 150 2WD Pickup V8-5.4L SOHC VIN 5 (2004)
2. NOTE: Install the Universal Joint Kit as a complete assembly only. Do not mix components from other kits.
NOTE: Lubricate the flange and driveshaft universal joint bores with grease before installing the bearing cups.
Install the bearing cup.
^
Position the new spider in the driveshaft yoke.
^
Start the new bearing cup into the driveshaft yoke.
^
Position the flange in the special tool.
3. NOTE: Swivel the U-Joint spider while installing the U-Joint cup.
Using the special tool, push the bearing cup into the flange bore and on the spider arm.
4. Push the bearing cup slightly below the shoulder in the flange bore.
5. Position the bearing cup spacer in the flange bore on top of the bearing cup.
^
The undercut on the bearing cup spacer fits against the shoulder in the flange bore.
