ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Rear Disc|Page 8259 > < Rear Disc|Page 8257
Page 3
background image

Rear Cable And Conduit Removal

-

Remove the parking brake rear cable and conduit.

NOTE: The spring is not removed, it remains in place.

1

Remove the spring.

2

Compress the retainers.

3

Remove the parking brake rear cable and conduit.

INSTALLATION

-

To install, reverse the removal procedure.

Parking Brake Front Cable And Conduit

REMOVAL:

-

Relieve the tension on the parking brake system.

NOTE: Make sure the parking brake control is fully released. 

1

Pull the front parking brake cable and conduit.

2

Insert a suitable retainer.

Parking Brake Cable And Conduit And Equalizer

-

Disconnect the (A) front parking brake cable and conduit from the (B) parking brake cable equalizer.

Rear Disc|Page 8259 > < Rear Disc|Page 8257