ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 7442 > < Initial Inspection and Diagnostic Overview|Page 7440
Page 26
background image

-

Is the voltage greater than 10 volts?

Yes

REPAIR circuit CBB82 (GN) for an open. TEST the system for normal operation.

No

REPAIR circuit CCB08 (VT/WH) for an open. TEST the system for normal operation.

-------------------------------------------------
AE9 CHECK THE TBC MODULE OUTPUT CIRCUIT FOR A SHORT TO GROUND

 

-

Measure the resistance between the trailer electric brake controller C2142-14, circuit CAT19 (BU), harness side and ground.

-

Is the resistance greater than 10,000 ohms?

Yes

GO to AE10.

No

REPAIR circuit CAT19 (BU) for a short to ground. TEST the system for normal operation.

-------------------------------------------------
AE10 CHECK THE TRAILER ELECTRIC BRAKE CONTROLLER OUTPUT CIRCUIT FOR AN OPEN

 

-

Connect a fused jumper wire between the trailer electric brake controller C2142-8, circuit SBB17 (RD), harness side and the trailer electric brake

Initial Inspection and Diagnostic Overview|Page 7442 > < Initial Inspection and Diagnostic Overview|Page 7440