F 150 4WD V8-4.6L VIN 8 (2010)
Hood Latch: Service and Repair
Hood Latch
Hood Latch
Removal and Installation
1. NOTE: Mark the location of the hood latch with a permanent-type marker.
Remove the 2 hood latch bolts and position the hood latch aside.
-
To install, tighten to 35 Nm (26 lb-ft).
2. Disconnect the primary hood latch release cable.
3. Disconnect the secondary hood latch release cable.
4. Remove the hood latch.
5. To install, reverse the removal procedure.
-
When the hood latch is installed, the latch adjustment must be checked to make sure the latch is installed and aligned correctly.