F 150 4WD V8-4.6L VIN 8 (2010)
6. If equipped with a roof opening panel, secure the hook-and-loop tape around the front edge of the roof opening panel and then secure the back
edge of the roof opening panel so that it is flush and the headliner does not sag. If sagging occurs, loosen the sun visors and coat hooks to realign
the headliner. Retighten the sunvisors and coat hooks.
7. Install the headliner pin-type retainers.
8. Connect the headliner electrical connectors.
9. If equipped, connect the mirror electrical connector and the rain sensor.
10. Install the overhead console. For additional information, refer to Instrument Cluster / Carrier &/or Interior Moulding / Trim.
11. Install the rear door latch covers and install the rear door latch cover screws.
12. Install the driver seat headrest.
13. Install the B-pillar trim panels. For additional information, refer to B-Pillar Trim Panel - SuperCab See: Trim Panel/Service and Repair/B-Pillar
Trim Panel - SuperCab.
14. Install the A-pillar trim panel. For additional information, refer to A-Pillar Trim Panel See: Trim Panel/Service and Repair/A-Pillar Trim Panel.