F 150 4WD V8-4.6L VIN 8 (2010)
Seat Backrest Cover - Front
Seat Backrest Cover - Front
Removal and Installation
WARNING: Front seat backrest trim covers installed on seats equipped with seat side air bags cannot be repaired. A new trim cover must be
installed. Cleaning is permissible. Failure to follow these instructions may result in the seat side air bag module deploying incorrectly and
increase the risk of serious personal injury or death in a crash.
NOTE: If a side air bag deployment took place, a new seat backrest foam pad, backrest trim cover, deployment chute and side air bag module and nuts
must be installed. A new seat backrest frame should be installed if necessary.
NOTE: For parts identification and location, refer to Seat - Exploded View, Front See: Service and Repair/Front Seats/Seat - Exploded View, Front.
1. Remove the seat. For additional information, refer to Seat - Front See: Service and Repair/Front Seats/Seat - Front.
2. Remove the 2 head restraint guide sleeves. For additional information, refer to Head Restraint Guide Sleeve See: Head Rest/Service and Repair.
3. Release the backrest cover J-clip and unzip the 2 zippers.
