F 150 4WD V8-4.6L VIN 8 (2010)
5. NOTICE: Use care when separating the seat backrest cover from the hook-and-loop strip, or the hook-and-loop strip can be torn from
the foam pad.
Invert the backrest cover and separate the hook-and-loop fasteners.
6. Remove the hog rings and backrest cover.
-
If needed, remove the hog rings from the backrest frame and separate from the foam pad.
7. To install, reverse the removal procedure.
Seat Cushion Cover - Rear, SuperCab
Seat Cushion Cover - Rear, SuperCab
Removal and Installation
NOTE: 40 percent and 60 percent rear seat cushion covers are removed in the same manor.
NOTE: For parts identification and location, refer to Seat - Exploded View, Rear, SuperCab See: Service and Repair/Rear Seats/Seat - Exploded View,
Rear, SuperCab.
1. Remove the rear seat cushion. For additional information, refer to Seat - Rear, SuperCab See: Service and Repair/Rear Seats/Seat - Rear,
SuperCab.
2. Release the cushion cover J-clip.
3. NOTICE: Use care when separating the seat cushion cover from the hook-and-loop strip, or the hook-and-loop strip can be torn from the
cushion foam pad.
Invert the cushion cover to the row of hog rings.
4. Remove the hog rings.
5. Invert and remove the cushion cover.
-
If needed, separate and remove foam pad from the cushion frame.
6. To install, reverse the removal procedure.
Seat - Exploded View, Rear, Crew Cab