F 150 4WD V8-4.6L VIN 8 (2010)
Truck Bed: Service and Repair
Pickup Bed Side Step Latch
Pickup Bed Side Step Latch
Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Vehicle Jacking and Lifting.
2. Open the step to the full extended position.
3. Remove the 2 step cover screws.
4. Slide the step cover off the step.
5. Remove the 4 latch nuts and the latch.
-
To install, tighten to 9 Nm (80 lb-in).
6. To install, reverse the removal procedure.