F 150 4WD V8-4.6L VIN 8 (2010)
Brake Disc
Brake Disc
Removal
1. Remove the wheel and tire. For additional information, refer to Wheels and Tires.
2. NOTICE: Do not allow the caliper and anchor plate assembly to hang from the brake hose or damage to the hose can occur.
Remove the 2 brake caliper anchor plate bolts and position the caliper and anchor plate assembly aside.
-
Support the caliper and anchor plate assembly using mechanic's wire.
3. Remove the front brake disc from the wheel hub.
Installation
1. Clean any rust or foreign material from the brake disc and wheel hub.
-
Use specified parts cleaner to clean the front brake disc and hub surfaces.
2. Install the brake disc on the wheel hub.
3. Position the brake caliper and anchor plate assembly on the wheel knuckle and install 2 new bolts.
-
Tighten to 250 Nm (184 lb-ft).
4. Install the wheel and tire. For additional information, refer to Wheels and Tires.
Brake Disc Shield
Brake Disc Shield
Removal and Installation