F 150 4WD V8-4.6L VIN 8 (2010)
![background image](/ford/f_150_4wd/v8-4.6l_vin_8/Page-1730001.png)
Brake Caliper: Testing and Inspection
Brake Noise Damper
Brake System Inspection
Brake Noise Damper
NOTICE: Do not remove the noise damper by twisting on the housing. Remove only by positioning aside the protective cap and using a
suitable torx driver or damage to damper may occur.
NOTE: The noise damper is serviced separately from the caliper guide pin stud bolt.
1. Inspect the brake noise damper for damage and correct installation.
-
If the noise damper is damaged or missing, install a new damper.