F 150 4WD V8-4.6L VIN 8 (2010)
Wheel Speed Sensor: Service and Repair
Wheel Speed Sensor - Rear
Wheel Speed Sensor - Rear
NOTE: Rear Wheel Drive (RWD) shown, Four-Wheel Drive (4WD) similar. LH shown, RH similar.
Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Vehicle Jacking and Lifting.
2. Disconnect the wheel speed sensor electrical connector.
3. Detach the wheel speed sensor harness retainers and pushpin retainers.
4. Remove the wheel speed sensor bolt and the wheel speed sensor.
-
To install, tighten to 15 Nm (133 lb-in).
5. To install, reverse the removal procedure.