F 150 4WD V8-4.6L VIN 8 (2010)
Removal
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Vehicle Jacking and Lifting.
2. Drain the cooling system. For additional information, refer to Cooling System Draining, Filling and Bleeding See: Service and Repair/Cooling
System Draining, Filling and Bleeding.
3. Evacuate the A/C system. For additional information, refer to Heating and Air Conditioning.
4. Disconnect the battery ground. For additional information, refer to Battery.
5. Remove the headlights.
6. Detach the LH hood latch cable retainer.
7. Detach the 2 RH hood latch cable retainers.
8. Remove the bolts and position the hood latch aside.
9. Remove the bolt, detach the hood latch release handle and the cable from the front bumper cover, and position the hood latch release handle aside.
10. Remove the front bumper cover. For additional information, refer to Bumper.