F 150 4WD V8-4.6L VIN 8 (2010)
16. Remove the Air Cleaner (ACL) outlet tube. For additional information, refer to Fuel Delivery and Air Induction.
17. Disconnect the Mass Air Flow (MAF) sensor electrical connector.
18. Remove the ACL cover and the ACL element.
19. Remove the 6 pushpins and the upper radiator air deflector.
20. Detach the power steering fluid cooler hose retainer and position the hose aside.
21. Release the clamp and disconnect the power steering fluid cooler hose from the power steering cooler.
22. Detach the wiring harness retainer from the power steering fluid reservoir stud bolt.
23. Remove the power steering fluid reservoir stud bolt.
24. If equipped, cut the block heater tie strap.
25. Remove the bolt and nut, and disconnect the A/C tube fittings from the A/C condenser. Discard the O-ring seals and gasket seals.
26. Disconnect the 2 cooling fan electrical connectors and detach the 3 cooling fan wiring harness retainers.