F 150 4WD V8-4.6L VIN 8 (2010)
4. Install the camshaft bearing caps in their original locations.
-
Lubricate the camshaft bearing caps with clean engine oil.
-
Position the front camshaft bearing cap.
-
Position the remaining camshaft bearing caps.
-
Install the bolts loosely.
5. Tighten the bolts in the sequence shown.
-
Tighten to 10 Nm (89 lb-in).
6. NOTE: Engine front cover removed from art for clarity.
Remove the Timing Chain Locking Tool.
7. Rotate the crankshaft a half turn counterclockwise until the No. 5 cylinder camshaft exhaust lobe opens the valve and the 2 intake lobes are in the 3
o'clock position as shown.
