F 150 4WD V8-4.6L VIN 8 (2010)
Variable Valve Timing Cover / Housing: Procedures
Variable Camshaft Timing (VCT) Housing Cleaning and Inspection
1. Remove the screw and the Variable Camshaft Timing (VCT) oil control solenoid.
-
To install, tighten to 5 Nm (44 lb-in).
2. Clean the mating surfaces and oil passages with metal surface prep. Follow the directions on the packaging.
3. Inspect the VCT housing for pitting, cracks or damaged sealing surfaces. Install a new VCT housing if damaged.