F 150 4WD V8-4.6L VIN 8 (2010)
Oil Pan: Service and Repair
Oil Pan
Oil Pan
Removal
All vehicles
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Vehicle Jacking and Lifting.
2. Remove the oil drain plug and drain the engine oil. Install the drain plug when finished.
-
Tighten to 23 Nm (17 lb-ft).
3. If equipped, remove the 4 bolts and the skid plate.
4. Remove the 4 nuts, the 4 bolts and the crossmember.
Four-Wheel Drive (4WD) vehicles
5. Position a suitable hydraulic jack under the front axle housing. Securely strap the jack to the axle.
6. NOTE: Rotate the steering column so the pinch bolt for the steering column coupling allows clearance for the mounting bushing bolt.
Remove the upper front axle housing mounting bushing bolt.