F 150 4WD V8-4.6L VIN 8 (2010)
![background image](/ford/f_150_4wd/v8-4.6l_vin_8/Page-821001.png)
Exhaust Manifold: Specifications
Install 8 new RH exhaust manifold studs.
Tighten to....................................................................................................................................................................................................12 Nm (106 lb-in).
Tighten the 8 exhaust manifold nuts in the sequence shown.
Tighten to.......................................................................................................................................................................................................25 Nm (18 lb-ft).
Install the heat shield and the 3 bolts.
Tighten to......................................................................................................................................................................................................10 Nm (89 lb-in).