F 150 4WD V8-4.6L VIN 8 (2010)
2. Remove the 2 upper instrument panel storage tray screws.
3. Disconnect the speaker electrical connector (if equipped).
4. Remove the upper instrument panel storage tray.
5. Disconnect the 2 HVAC module electrical connectors.
Vehicles without navigation system
6. Remove the center instrument panel finish panel. For additional information, refer to Instrument Cluster / Carrier &/or Interior Moulding / Trim.
All vehicles
7. Remove the 4 HVAC module screws.
8. Remove the HVAC module.
9. To install, reverse the removal procedure.