ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 9105 > < Initial Inspection and Diagnostic Overview|Page 9103
Page 5
background image

-

Is the voltage greater than 10 volts?

Yes

INSTALL a new high mounted stoplamp. TEST the system for normal operation.

No

REPAIR circuit GD139 (BK/YE) for an open. TEST the system for normal operation.

-------------------------------------------------
J4 CHECK FOR VOLTAGE TO THE LH STOPLAMP

 

-

Disconnect: LH Rear Lamp.

-

While applying the brake pedal, measure the voltage between the LH rear lamp, harness side and ground as follows:

-

Is the voltage greater than 10 volts?

Yes

REPAIR circuit GD120 (BK/GN) for an open. TEST the system for normal operation.

Initial Inspection and Diagnostic Overview|Page 9105 > < Initial Inspection and Diagnostic Overview|Page 9103