F 150 4WD V8-4.6L VIN 8 (2010)
![background image](/ford/f_150_4wd/v8-4.6l_vin_8/Page-2962001.png)
Headlamp Dimmer Switch: Service and Repair
Steering Column Multifunction Switch
NOTE: Power tilt column shown, manual tilt similar.
Removal and Installation
1. Remove the steering column shroud. For additional information, refer to Steering Column.
2. Disconnect the 2 multifunction switch electrical connectors.
3. Remove the 2 screws and the multifunction switch.
-
To install, tighten to 1 Nm (9 lb-in).
4. To install, reverse the removal procedure.