F 150 4WD V8-4.6L VIN 8 (2010)
-
Ignition OFF.
-
Set the gain on the TBC module to the maximum setting.
-
While applying the brake pedal, measure the voltage between the trailer tow connector pin 3, circuit CAT19 (BU), component side and ground.
-
Is the voltage greater than 10 volts?
Yes
The vehicle is operating correctly. SEND the trailer to an authorized camper/trailer repair facility.
No
GO to AE4.
-------------------------------------------------
AE4 CHECK FOR VOLTAGE TO THE TRAILER TOW CONNECTOR
-
Disconnect: Trailer Tow C439a.
-
NOTE: Make sure the gain is still set to the maximum setting.
-
While applying the brake pedal, measure the voltage between the trailer tow C439a-3, circuit CAT19 (BU), harness side and ground.
-
Is the voltage greater than 10 volts?
Yes
INSTALL a new trailer tow connector. TEST the system for normal operation.
No
GO to AE5.
-------------------------------------------------
AE5 CHECK FOR VOLTAGE TO THE TBC MODULE
-
Disconnect: TBC Module C2142.
-
Measure the voltage between the TBC module C2142-8, circuit SBB17 (RD), harness side and ground.
-
Is the voltage greater than 10 volts?