ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Brake Bleeding > < Refrigerant Oil|Capacity Specifications|Page 1589
Page 2
background image

 
Refrigerant Oil Adding for New A/C Compressor With Clutch Installation

1. Rotate the old A/C compressor shaft 6 to 8 revolutions while collecting oil in a clean measuring device.

-

If the amount of oil drained from the old A/C compressor is less than 89 ml (3 oz), remove 118 ml (4 oz) from the new A/C compressor.

-

If the amount of oil drained from the old A/C compressor is 89 ml (3 oz), remove 89 ml (3 oz) from the new A/C compressor.

-

If the amount of oil drained from the old A/C compressor is 118 ml (4 oz), remove 59 ml (2 oz) from the new A/C compressor.

-

If the amount of oil drained from the old A/C compressor is 148 ml (5 oz), remove 29 ml (1 oz) from the new A/C compressor.

-

If the amount of oil drained from the old A/C compressor is greater than 148 ml (5 oz), remove 0 ml (0 oz) from the new A/C compressor.

 
Oil Injection Using a Dye/Lubricant Injector

NOTE:  The dye/lubricant injector is included as part of the 219-00069 R-134a Loop/Add On Injector Kit-Set.

NOTE:  If fluorescent leak detection dye is also to be added during A/C charging, the dye may be added to the dye/lubricant injector along with the 
refrigerant oil.

1. Evacuate the refrigerant system. For additional information, refer to Air Conditioning (A/C) System Recovery, Evacuation and Charging  See:

Heating and Air Conditioning/Service and Repair/Air Conditioning (A/C) System Recovery, Evacuation and Charging.

2. Assemble the dye/lubricant injector using the correct adapters to match the amount of refrigerant compressor oil to be injected.

3. Verify that all the valves on the dye/lubricant injector are closed.

4. Fill the dye/lubricant injector with the correct amount of new refrigerant compressor oil.

5. Install the dye/lubricant injector between the low-side service gauge port valve and the refrigerant service station or manifold gauge set.

6. Open all valves and charge the refrigerant system. For additional information, refer to Air Conditioning (A/C) System Recovery, Evacuation and

Charging  See: Heating and Air Conditioning/Service and Repair/Air Conditioning (A/C) System Recovery, Evacuation and Charging.

Brake Bleeding > < Refrigerant Oil|Capacity Specifications|Page 1589