F 150 4WD V8-4.6L VIN 8 (2010)
Shift Interlock Solenoid: Service and Repair
Brake Shift Interlock Actuator - Column Shift
Brake Shift Interlock Actuator - Column Shift
Removal and Installation
1. Apply the park brake and turn the ignition switch to the OFF position.
2. NOTICE: To prevent damage to the selector lever boot, do not pull out on the top of the boot frame.
Remove the selector lever boot from the steering column shroud by pressing in on the selector lever boot frame.
3. Position the selector lever boot up the selector lever.
4. Turn the steering wheel one-half turn to access the slots on each side of the steering column shroud.
5. Insert a suitable tool into each slot to unsnap and remove the steering column upper shroud. Rotate the upper shroud on its hinges and pull
rearward to remove the shroud from its hinges.
6. Turn the ignition switch to the ON position. Pull back on the brake shift interlock plunger, apply the brake and shift the transmission into
NEUTRAL.