F 150 4WD V8-4.6L VIN 8 (2010)
Seat Heater Control Module: Service and Repair
Heated Seat Module - Front
Heated Seat Module - Front
Removal and Installation
NOTE: For parts identification and location, refer to Seat - Exploded View, Front See: Body and Frame/Seats/Service and Repair/Front Seats/Seat -
Exploded View, Front.
1. Remove the seat. For additional information, refer to Seat - Front See: Body and Frame/Seats/Service and Repair/Front Seats/Seat - Front.
2. Disconnect the 2 heated seat module electrical connectors.
3. Remove the screw and heated seat module from the seat track.
-
Tip the heated seat module and slide the retainer tabs out of the seat track bracket.
4. To install, reverse the removal procedure.